Screen Fillers TC6004 / TC6005 / TC6014 / TC6015

Technical Information

Properties

TC6004 Red Filler is fast drying and water soluble. Used for masking out screens prior to printing and for quick repairs to damaged stencil. Resists all types of screen printing inks and solvents except water-based products.

TC6005 Blue Filler is a water-based filler, with an average drying speed. Easy to apply and provides excellent flexibility with very good resistance to all types of screen printing inks and solvents except water-based products. Can also be used for spotting in and retouching stencils.

TC6014 Green Filler is a low solvent based filler which is faster drying than TC6005 Blue Filler. Suitable for all types of screen printing inks and solvents except water-based products. Can also be used for spotting in and retouching stencils.

TC6015 Water Resistant Filler is a water-based filler formulated for use with water-based inks.

Instructions for use:

1 Spread a small amount over the screen with a plastic spatula or card, remove any surplus from the other side of the screen and allow to dry.

2 A second application on the underside may be necessary on coarse screens.

3 Spot out pinholes with TC6005 Blue Filler or TC6014 Green Filler, if the print run has already begun ensure the surface is dry before applying.

To remove filler:

1 Remove ink residue with TC6009 Screensolve and leave to dry.

2 Hose screen with cold water (NB screens must be free of filler before stencil removal).

Packaging:
Screen Fillers Pack Size: 1 litre or 5 litre