TC6002 Mesh Prep No 1 - TC6003 Mesh Prep No 2

Technical Information

Properties

TC6002 Mesh Prep No 1 is a combination of surface abrasion and degreaser recommended for the preparation of new mesh for use with all types of stencils. Suitable for all mesh, TC6002 Mesh Prep No 1 considerably enhances the life of the stencil.

TC6003 Mesh Prep No 2 is especially formulated for the preparation for all modern types of both new and used mesh. Compatible with stencils previously treated with TC6002 Mesh Prep No 1. By preventing static and removing dust, pinholes and fisheyes are completely eliminated thus ensuring optimum stencil adhesion.

Instructions for use:

1 Wet the screen to be treated with cold water.

2 Apply a small quantity to both sides of the screen. In the case of TC6002 Mesh Prep No 1 and TC6003 Mesh Prep No 2 rub with brush or sponge in circular motion.

3 Allow to stand for a few minutes.

4 Hose or wash off with copious amounts of cold water. Do not use hot water, as this may block the mesh.

5 Allow to dry before applying stencils.

Packaging:
TC 6002 Mesh Prep No 1 Pack Size: 1 litre or 5 litre
Colour: Grey
TC 6003 Mesh Prep No 2 Pack Size: 1 litre or 5 litre
Colour: Blue